using Newtonsoft.Json.Linq;
using Pub_Class;
using System;
using System.Collections.Generic;
using System.Data;
using System.Web.Http;
using WebAPI.Models;
namespace WebAPI.Controllers
{
/**
* 找货单单
*/
public class Sc_MouldRepairInBillListController : ApiController
{
public DBUtility.ClsPub.Enum_BillStatus BillStatus;//单据状态（新增，修改，浏览，更新单价，变更）
private json objJsonResult = new json();
public DataSet ds = new DataSet();
public WebServer webserver = new WebServer();
public DAL.ClsSc_MouldScrapInBill BillNew0 = new DAL.ClsSc_MouldScrapInBill(); //模具报废入库对应单据类
public DAL.ClsSc_MouldScrapInBill BillOld0 = new DAL.ClsSc_MouldScrapInBill(); //模具报废入库对应单据类
///
/// 根据包装单 返回此包装单内的相关信息
///
///
///
/// 检具维修工单列表
///
///
[Route("Sc_CheckToolsRepair/GetCheckToolsRepairWorkBillList")]
[HttpGet]
public object GetCheckToolsRepairWorkBillList(string sWhere)
{
try
{
ds = Sc_CheckToolsRepairWorkBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_CheckToolsRepairWorkBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsRepairWorkBillList ", "h_v_Sc_CheckToolsRepairWorkBillList");
}
///
/// 检具点检计划表列表
///
///
[Route("Sc_CheckToolsDotCheckPlan/GetCheckToolsDotCheckPlanBillList")]
[HttpGet]
public object GetCheckToolsDotCheckPlanBillList(string sWhere)
{
try
{
ds = Sc_CheckToolsDotCheckPlanBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_CheckToolsDotCheckPlanBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsDotCheckPlanBillList ", "h_v_Sc_CheckToolsDotCheckPlanBillList");
}
#endregion
///
/// 检具保养记录表列表
///
///
[Route("Sc_CheckToolsMaintainBill/GetCheckToolsMaintainBillList")]
[HttpGet]
public object GetCheckToolsMaintainBillList(string sWhere)
{
try
{
ds = Sc_CheckToolsMaintainBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_CheckToolsMaintainBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsMaintainBillList ", "h_v_Sc_CheckToolsMaintainBillList");
}
#endregion
///
/// 模具保养记录表列表
///
///
[Route("Sc_MouldMaintainBill/GetMouldMaintainBillList")]
[HttpGet]
public object GetMouldMaintainBillList(string sWhere)
{
try
{
ds = Sc_MouldMaintainBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_MouldMaintainBillList_s(string sWhere)
{
if (sWhere == null || sWhere.Equals(""))
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldMaintain order by 日期 desc", "h_v_Sc_MouldMaintain");
}
else
{
string sql1 = "select * from h_v_Sc_MouldMaintain where 1 = 1 ";
string sql = sql1 + sWhere+ "order by 日期 desc";
return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldMaintain");
}
//return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldMaintainBillList ", "h_v_Sc_MouldMaintainBillList");
}
#endregion
///
/// 模具点检计划表列表
///
///
[Route("Sc_MouldDotCheckPlanBill/GetMouldDotCheckPlanBillList")]
[HttpGet]
public object GetMouldDotCheckPlanBillList(string sWhere)
{
try
{
ds = Sc_MouldDotCheckPlanBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_MouldDotCheckPlanBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldDotCheckPlanBillList ", "h_v_Sc_MouldDotCheckPlanBillList");
}
#endregion
///
/// 模具点检记录表列表
///
///
[Route("Sc_MouldDotCheckBill/GetMouldDotCheckBillList")]
[HttpGet]
public object GetMouldDotCheckBillList(string sWhere)
{
try
{
ds = Sc_MouldDotCheckBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_MouldDotCheckBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldDotCheckBillList where 1=1 "+sWhere+" ", "h_v_Sc_MouldDotCheckBillList");
}
#endregion
///
/// 检具保养计划表列表
///
///
[Route("Sc_CheckToolsMaintainPlanBill/GetCheckToolsMaintainPlanBillList")]
[HttpGet]
public object GetCheckToolsMaintainPlanBillList(string sWhere)
{
try
{
ds = Sc_CheckToolsMaintainPlanBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_CheckToolsMaintainPlanBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsMaintainPlanBillList ", "h_v_Sc_CheckToolsMaintainPlanBillList");
}
#endregion
///
/// 模具保养计划表列表
///
///
[Route("Sc_MouldMaintainPlanBill/GetMouldMaintainPlanBillList")]
[HttpGet]
public object GetMouldMaintainPlanBillList(string sWhere)
{
try
{
ds = Sc_MouldMaintainPlanBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_MouldMaintainPlanBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldMaintainPlanBillList ", "h_v_Sc_MouldMaintainPlanBillList");
}
#endregion
///
/// 模具故障登记表列表
///
///
[Route("Sc_MouldConkBookBill/GetMouldConkBookBillList")]
[HttpGet]
public object GetMouldConkBookBillList(string sWhere)
{
try
{
ds = Sc_MouldConkBookBillList_s(sWhere);
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "Sucess！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_MouldConkBookBillList_s(string sWhere)
{
DataSet ds;
if (sWhere == null || sWhere.Equals(""))
{
ds = new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldConkBookBillList order by 日期 desc" + sWhere, "h_v_Sc_MouldConkBookBillList");
}
else
{
string sql1 = "select * from h_v_Sc_MouldConkBookBillList where 1 = 1 ";
string sql = sql1 + sWhere+ "order by 日期 desc";
ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldConkBookBillList");
}
return ds;
}
#endregion
///
/// 模具维修验收单列表
///
///
[Route("Sc_MouldRepairCheckBill/GetMouldRepairCheckBillList")]
[HttpGet]
public object GetMouldRepairCheckBillList(string sWhere)
{
try
{
ds = Sc_MouldRepairCheckBillList_s(sWhere);
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_MouldRepairCheckBillList_s(string sWhere)
{
DataSet ds;
if (sWhere == null || sWhere.Equals(""))
{
ds = new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairCheckBillList_Edit order by 日期 desc" + sWhere, "h_v_Sc_MouldRepairCheckBillList_Edit");
}
else
{
string sql1 = "select * from h_v_Sc_MouldRepairCheckBillList_Edit where 1 = 1 ";
string sql = sql1 + sWhere+ "order by 日期 desc";
ds = new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairCheckBillList_Edit");
}
return ds;
}
#endregion
///
/// 检具维修验收单列表
///
///
[Route("Sc_CheckToolsRepairCheckBill/GetCheckToolsRepairCheckBillList")]
[HttpGet]
public object GetCheckToolsRepairCheckBillList(string sWhere)
{
try
{
ds = Sc_CheckToolsRepairCheckBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_CheckToolsRepairCheckBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsRepairCheckBillList ", "h_v_Sc_CheckToolsRepairCheckBillList");
}
#endregion
#region sql语句
//public static DataSet Sc_MouldRepairCheckBillList_s(string sWhere)
//{
// return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairCheckBillList ", "h_v_Sc_MouldRepairCheckBillList");
//}
#endregion
///
/// 模具维修工单表列表
///
///
[Route("Sb_MouldRepairWorkBill/GetMouldRepairWorkBillList")]
[HttpGet]
public object GetMouldRepairWorkBillList(string sWhere)
{
try
{
ds = Sc_MouldRepairWorkBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_MouldRepairWorkBillList_s(string sWhere)
{
if (sWhere == null || sWhere.Equals(""))
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_MouldRepairWorkBillList order by 日期 desc" + sWhere, "h_v_Sc_MouldRepairWorkBillList");
}
else
{
string sql1 = "select * from h_v_Sc_MouldRepairWorkBillList where 1 = 1 ";
string sql = sql1 + sWhere+ "order by 日期 desc";
return new SQLHelper.ClsCN().RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList");
}
}
#endregion
///
/// 检具故障登记表列表
///
///
[Route("Sc_CheckToolsConkBookBill/GetCheckToolsConkBookBillList")]
[HttpGet]
public object GetCheckToolsConkBookBillList(string sWhere)
{
try
{
ds = Sc_CheckToolsConkBookBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_CheckToolsConkBookBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsConkBookBillList ", "h_v_Sc_CheckToolsConkBookBillList");
}
#endregion
///
/// 检具点检记录表列表
///
///
[Route("Sc_CheckToolsDotCheckBill/GetCheckToolsDotCheckBillList")]
[HttpGet]
public object GetCheckToolsDotCheckBillList(string sWhere)
{
try
{
ds = Sc_CheckToolsDotCheckBillList_s(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_CheckToolsDotCheckBillList_s(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Sc_CheckToolsDotCheckBillList ", "h_v_Sc_CheckToolsDotCheckBillList");
}
#endregion
///
/// 调拨单列表
///
///
[Route("Kf_MoveStockBill/GetMoveStockBillList")]
[HttpGet]
public object GetMoveStockBillList(string sWhere)
{
try
{
ds = Sc_GetMoveStockBillList(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_GetMoveStockBillList(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_MoveStockBillList ", "h_v_IF_MoveStockBillList");
}
#endregion
///
/// 生产领料单列表
///
///
[Route("Kf_MateOutBill/GetMateOutBillList")]
[HttpGet]
public object GetMateOutBillList(string sWhere)
{
try
{
ds = Sc_GetMateOutBillList(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_GetMateOutBillList(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_MateOutBillList ", "h_v_IF_MateOutBillList");
}
#endregion
///
/// 销售出库单列表
///
///
[Route("Kf_SellOutBill/GetSellOutBillList")]
[HttpGet]
public object GetSellOutBillList(string sWhere)
{
try
{
ds = Sc_GetSellOutBillList(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_GetSellOutBillList(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_SellOutBillList ", "h_v_IF_SellOutBillList");
}
#endregion
///
/// 其他出库单列表
///
///
[Route("Kf_OtherOutBill/GetOtherOutBillList")]
[HttpGet]
public object GetOtherOutBillList(string sWhere)
{
try
{
ds = Sc_GetOtherOutBillList(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_GetOtherOutBillList(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Kf_OtherOutBillList ", "h_v_Kf_OtherOutBillList");
}
#endregion
///
/// 委外出库单列表
///
///
[Route("Kf_EntrustOutBill/GetEntrustOutBill")]
[HttpGet]
public object GetEntrustOutBill(string sWhere)
{
try
{
ds = Sc_GetEntrustOutBill(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_GetEntrustOutBill(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Kf_EntrustOutBillList ", "h_v_Kf_EntrustOutBillList");
}
#endregion
///
/// 采购入库单列表
///
///
[Route("Kf_POStockInBill/GetPOStockInBill")]
[HttpGet]
public object GetPOStockInBill(string sWhere)
{
try
{
ds = Sc_GetPOStockInBill(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_GetPOStockInBill(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_POStockInBillList ", "h_v_IF_POStockInBillList");
}
#endregion
///
/// 产品入库单列表
///
///
[Route("Kf_ProductInBill/GetProductInBill")]
[HttpGet]
public object GetProductInBill(string sWhere)
{
try
{
ds = Sc_GetProductInBill(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_GetProductInBill(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_IF_ProductInBillList ", "h_v_IF_ProductInBillList");
}
#endregion
///
/// 其他入库单列表
///
///
[Route("Kf_OtherInBill/GetOtherInBill")]
[HttpGet]
public object GetOtherInBill(string sWhere)
{
try
{
ds = Sc_GetOtherInBill(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_GetOtherInBill(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Kf_OtherInBillList ", "h_v_Kf_OtherInBillList");
}
#endregion
///
/// 委外入库单列表
///
///
[Route("Kf_EntrustInBill/GetEntrustInBill")]
[HttpGet]
public object GetEntrustInBill(string sWhere)
{
try
{
ds = Sc_GetEntrustInBill(sWhere);
if (ds == null || ds.Tables[0].Rows.Count <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "返回记录成功！";
objJsonResult.data = ds.Tables[0];
return objJsonResult;
}
}
catch (Exception ex)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + ex.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#region sql语句
public static DataSet Sc_GetEntrustInBill(string sWhere)
{
return new SQLHelper.ClsCN().RunProcReturn("select * from h_v_Kf_EntrustInBillList ", "h_v_Kf_EntrustInBillList");
}
#endregion
//测试专用接口
[Route("LookingFor/Test")]
[HttpGet]
public object Test(string HbillNo)//Sc_CheckToolsRepair/GetCheckToolsRepairWorkBillList
{
DataSet ds;
ds = new SQLHelper.ClsCN().RunProcReturn("EXEC h_p_Xs_SellOutFindSP '" + HbillNo + "'", "h_p_Xs_SellOutFindSP");
if (Pub_Class.ClsPub.isLong(ds.Tables[0].Rows.Count) >= 0)
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "true！";
objJsonResult.data = ds.Tables[0];//ds.Tables[0].Rows[1][0]
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "false！";
objJsonResult.data = null;
return objJsonResult;
}
}
#endregion
#region 模具维修单保存/编辑
///
/// 保存模具维修单
///
///
///
[Route("Sb_MouldRepairWorkBill/SaveGetMouldRepairWorkBillList")]
[HttpPost]
public object SaveGetMouldRepairWorkBillList([FromBody] JObject msg)
{
var _value = msg["msg"].ToString();
string msg1 = _value.ToString();
string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
string msg2 = sArray[0].ToString();
string msg3 = sArray[1].ToString();
string UserName = "";
ListModels oListModels = new ListModels();
try
{
DAL.ClsSb_MouldRepairWorkBill oBill = new DAL.ClsSb_MouldRepairWorkBill();
List lsmain = new List();
msg2 = msg2.Replace("\\", "");
msg2 = msg2.Replace("\n", ""); //\n
lsmain = oListModels.getObjectByJson_Gy_MouldRepairWorkBillMain(msg2);
foreach (Model.ClsSb_MouldRepairWorkBillMain oItem in lsmain)
{
//oItem.HMaker = "";
UserName = oItem.HMaker; //制单人
oItem.HBillType = "3807";
oItem.HBillSubType = "3807";
//oItem.HBillNo = ""; //单据号
//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
//oItem.HPeriod = 0;
//oItem.HRepairBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修开始日期
//oItem.HRepairEndDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --维修结束日期
//oItem.HRepairContent = ""; //维修内容
//oItem.HCycleUnit = ""; //时间单位(小时，天)
//oItem.HPlanTimes = 0; //计划维修工时
//oItem.HTimes = 0; //实际维修工时
//oItem.HEmpID = 0; //维修人(Gy_Employee)
//oItem.HManagerID = 0; //主管(Gy_Employee)
//oItem.HDeptID = 0; //维修部门(Gy_Department)
//oItem.HExplanation = ""; //--维修要求
//oItem.HInnerBillNo = ""; // --内部单据号
//oItem.HMouldID = 0; //成品模具ID
//oItem.HSupID = 0; //--供应商（Gy_Supplier）
//oItem.HRepairType = ""; //--维修类型（内部维修，委外维修） addnew
//oItem.HNewModel = ""; //维修后新规格
//oItem.HNewDesignLife = 0; //新设计寿命
//oItem.HRepairID = 0; //维修项目(Gy_Repair)
//oItem.HRemark = ""; //备注
//oItem.HMainSourceInterID = oItem.HInterID;
//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
objJsonResult.data = 1;
return objJsonResult;
}
oBill.omodel = oItem;
}
//表体数据
//按 },{来拆分数组 //去掉【和】
msg3 = msg3.Substring(1, msg3.Length - 2);
msg3 = msg3.Replace("\\", "");
msg3 = msg3.Replace("\n", ""); //\n
//msg2 = msg2.Replace("'", "’");
List ls = new List();
ls = oListModels.getObjectByJson_Gy_MouldRepairWorkBillSub(msg3);
int i = 0;
foreach (Model.ClsSb_MouldRepairWorkBillSub oItemSub in ls)
{
i++;
oItemSub.HEntryID = i;
//oItemSub.HCloseMan = ""; //行关闭
oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
oItemSub.HCloseType = false; //关闭类型
//oItemSub.HRemark = ""; //备注
oItemSub.HSourceInterID = 0; // 源单主内码
oItemSub.HSourceEntryID = 0; //源单子内码
//oItemSub.HSourceBillNo = ""; //源单单号
//oItemSub.HSourceBillType = ""; //源单类型
oItemSub.HRelationQty = 0; //关联数量
//oItemSub.HRelationMoney = 0; //关联金额
//oItemSub.HRepairID = 0; //维修项目
//oItemSub.HRepairExplanation =""; //维修要求
//oItemSub.HManagerID = 0; //负责人ID
//oItemSub.HMoney = 0; //维修费用
oBill.DetailColl.Add(oItemSub);
}
//保存
//保存完毕后处理
bool bResult;
if (oBill.omodel.HInterID == 0)
{
// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
}
else
{
bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
}
if (bResult)
{
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "保存成功！";
//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
objJsonResult.data = 1;
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = 1;
return objJsonResult;
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + e.ToString();
objJsonResult.data = 1;
return objJsonResult;
}
}
#endregion
#region[模具维修列表编辑时获取表头数据]
[Route("Sb_MouldRepairWorkBill/Sb_MouldRepairWorkBillListCheckDetai")]
[HttpGet]
public ApiResult Sb_MouldRepairWorkBillListCheckDetai(string HID)
{
if (string.IsNullOrEmpty(HID))
return new ApiResult { code = -1, msg = "ID不能为空" };
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldRepairWorkBillList_Edit where hmainid= " + HID + " ", "h_v_Sc_MouldRepairWorkBillList_Edit");
if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
return new ApiResult { code = -1, msg = "不存在维修单号" };
return new ApiResult { code = 1, msg = "查询成功", data = dataSet };
}
#endregion
#region[模具维修列表编辑时获取表体数据]
[Route("Sb_MouldRepairWorkBill/Sb_MouldRepairWorkBillListProjectDetai")]
[HttpGet]
public object Sb_MouldRepairWorkBillListProjectDetai(string sqlWhere)
{
DataSet ds;
try
{
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
if (sqlWhere == null || sqlWhere.Equals(""))
{
//ds = oCN.RunProcReturn("select HRepairID,HRepairExplanation,HManagerID,HMoney,HRemark from Sc_MouldRepairWorkBillSub", "Sc_MouldRepairWorkBillSub");
ds = oCN.RunProcReturn("select HRepairID, 子维修项目代码 HRepairCode,子维修项目 HRepairName,子维修要求 HRepairExplanation,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,维修费用 HMoney,表体备注 HRemark from h_v_Sc_MouldRepairWorkBillList_Edit", "h_v_Sc_MouldRepairWorkBillList_Edit");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
else
{
//string sql1 = "select HRepairID,HRepairExplanation,HManagerID,HMoney,HRemark from Sc_MouldRepairWorkBillSub where 1 = 1 ";
string sql1 = "select HRepairID,子维修项目代码 HRepairCode,子维修项目 HRepairName,子维修要求 HRepairExplanation,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,维修费用 HMoney,表体备注 HRemark from h_v_Sc_MouldRepairWorkBillList_Edit where 1 = 1 ";
string sql = sql1 + sqlWhere;
ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldRepairWorkBillList_Edit");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + e.ToString();
objJsonResult.data = null;
}
return objJsonResult;
}
#endregion
#region [模具维修单删除功能]
///
/// 模具维修单删除功能
///
///
[Route("Sb_MouldRepairWorkBill/DeltetMouldRepairWorkBill")]
[HttpGet]
public object DeltetMouldRepairWorkBill(string HInterID)
{
//编辑权限
//if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
//{
// objJsonResult.code = "0";
// objJsonResult.count = 0;
// objJsonResult.Message = "无删除权限！";
// objJsonResult.data = null;
// return objJsonResult;
//}
Int64 lngBillKey = 0;
lngBillKey = DBUtility.ClsPub.isLong(HInterID);
if (lngBillKey == 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据ID为空！";
objJsonResult.data = null;
return objJsonResult;
}
DAL.ClsSb_MouldRepairWorkBill oBill = new DAL.ClsSb_MouldRepairWorkBill();
if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
{
if (oBill.omodel.HBillStatus > 1)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据当前处于不能删除状态,不能删除！";
objJsonResult.data = null;
return objJsonResult;
}
if (oBill.omodel.HChecker != "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据已经审核,不能删除！";
objJsonResult.data = null;
return objJsonResult;
}
bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
if (IsDete)
{
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据未找到";
objJsonResult.data = null;
return objJsonResult;
}
}
#endregion
#region [模具维修单审核、反审核]
///
///
///
/// 单据ID
/// 审核(0),反审核(1)
/// 审核人
///
[Route("Sb_MouldRepairWorkBill/AuditProcessReportList")]
[HttpGet]
public object AuditProcessReportList(int HInterID, int IsAudit, string CurUserName)
{
string ModRightNameCheck = "Sb_MouldRepairWorkBill_Check";
DBUtility.ClsPub.CurUserName=CurUserName;
try
{
//审核权限
if (!DBUtility.ClsPub.Security_Log(ModRightNameCheck, 1, true, CurUserName))
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "审核失败！无权限！";
objJsonResult.data = null;
return objJsonResult;
}
if (HInterID <= 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "HInterID小于0！";
objJsonResult.data = null;
return objJsonResult;
}
Int64 lngBillKey = 0;
lngBillKey = DBUtility.ClsPub.isLong(HInterID);
DAL.ClsSb_MouldRepairWorkBill oBill = new DAL.ClsSb_MouldRepairWorkBill();
//查看是否已审核,关闭,作废
if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
{
if (oBill.omodel.HCloseMan.Trim() != "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据已关闭!不能再次审核！";
objJsonResult.data = null;
return objJsonResult;
}
if (oBill.omodel.HDeleteMan.Trim() != "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据已作废!不能再次审核！";
objJsonResult.data = null;
return objJsonResult;
}
if (IsAudit == 0) //审核判断
{
if (oBill.omodel.HChecker.Trim() != "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据已审核!不能再次审核！";
objJsonResult.data = null;
return objJsonResult;
}
}
if (IsAudit == 1) //反审核判断
{
if (oBill.omodel.HChecker.Trim() == "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据未审核!不需要反审核!";
objJsonResult.data = null;
return objJsonResult;
}
}
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据不存在!原因:" + DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
if (IsAudit == 0) //审核提交
{
//审核提交
if (oBill.CheckBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "审核成功";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
}
if (IsAudit == 1) //反审核提交
{
//反审核提交AbandonCheck
if (oBill.AbandonCheck(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo) == true)
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "反审核成功";
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "1";
objJsonResult.count = 1;
objJsonResult.Message = "反审核失败!原因:" + DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
}
return objJsonResult;
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "审核失败或者反审核失败！" + e.ToString();
objJsonResult.data = null;
return objJsonResult;
}
}
#endregion
#region 模具维修验收单保存/编辑
///
/// 保存模具维修单
///
///
///
[Route("Sc_MouldRepairCheckBill/SaveGetMouldRepairCheckBillList")]
[HttpPost]
public object SaveGetMouldRepairCheckBillList([FromBody] JObject msg)
{
var _value = msg["msg"].ToString();
string msg1 = _value.ToString();
string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
string msg2 = sArray[0].ToString();
string msg3 = sArray[1].ToString();
string msg4 = sArray[2].ToString();
string UserName = "";
ListModels oListModels = new ListModels();
try
{
DLL.ClsSc_MouldRepairCheckBill oBill = new DLL.ClsSc_MouldRepairCheckBill();
List lsmain = new List();
msg2 = msg2.Replace("\\", "");
msg2 = msg2.Replace("\n", ""); //\n
lsmain = oListModels.getObjectByJson_Gy_MouldRepairCheckBillMain(msg2);
foreach (Model.ClsSc_MouldRepairCheckBillMain oItem in lsmain)
{
oItem.HMaker = msg4;
UserName = oItem.HMaker; //制单人
oItem.HBillType = "3817";
oItem.HBillSubType = "3817";
//oItem.HBillNo = ""; //单据号
//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
//oItem.HInnerBillNo = ""; // --内部单据号
oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
//oItem.HPeriod = 0;
//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
//oItem.HCheckResult = ""; //验收结论--(正常，异常)
//oItem.HEmpID = 0; //验收人(Gy_Employee)
//oItem.HManagerID = 0; //负责人(Gy_Employee)
//oItem.HDeptID = 0; //验收部门(Gy_Department)
//oItem.HExplanation = ""; //摘要(故障描述)
//oItem.HRemark = ""; //备注
//oItem.HMainSourceInterID = oItem.HInterID;
//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
objJsonResult.data = 1;
return objJsonResult;
}
oBill.omodel = oItem;
}
//表体数据
//按 },{来拆分数组 //去掉【和】
msg3 = msg3.Substring(1, msg3.Length - 2);
msg3 = msg3.Replace("\\", "");
msg3 = msg3.Replace("\n", ""); //\n
//msg2 = msg2.Replace("'", "’");
List ls = new List();
ls = oListModels.getObjectByJson_Gy_MouldRepairCheckBillSub(msg3);
int i = 0;
foreach (Model.ClsSc_MouldRepairCheckBillSub oItemSub in ls)
{
i++;
oItemSub.HEntryID = i;
//oItemSub.HRepairCheckID = 0; //验收项目ID
//oItemSub.HRepairCheckContent = ""; //验收内容
//oItemSub.HManagerID = 0; //负责人ID
//oItemSub.HCloseMan = ""; //行关闭
oItemSub.HCloseType = false; //关闭类型
//oItemSub.HRemark = ""; //备注
oItemSub.HSourceInterID = 0; // 源单主内码
oItemSub.HSourceEntryID = 0; //源单子内码
//oItemSub.HSourceBillNo = ""; //源单单号
//oItemSub.HSourceBillType = ""; //源单类型
//oItemSub.HRelationQty = 0; //关联数量
//oItemSub.HRelationMoney = 0; //关联金额
//oItemSub.HRepairID = 0; //维修项目
//oItemSub.HRepairExplanation =""; //维修要求
//oItemSub.HMoney = 0; //维修费用
oBill.DetailColl.Add(oItemSub);
}
//保存
//保存完毕后处理
bool bResult;
if (oBill.omodel.HInterID == 0)
{
// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
}
else
{
bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
}
if (bResult)
{
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "保存成功！";
//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
objJsonResult.data = 1;
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = 1;
return objJsonResult;
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + e.ToString();
objJsonResult.data = 1;
return objJsonResult;
}
}
#endregion
#region[模具维修验收单编辑时获取表头数据]
[Route("Sc_MouldRepairCheckBill/Sb_MouldRepairCheckBillListCheckDetai")]
[HttpGet]
public ApiResult Sb_MouldRepairCheckBillListCheckDetai(string HID)
{
if (string.IsNullOrEmpty(HID))
return new ApiResult { code = -1, msg = "ID不能为空" };
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldRepairCheckBillList_Edit where hmainid= " + HID + " ", "h_v_Sc_MouldRepairCheckBillList_Edit");
if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
return new ApiResult { code = -1, msg = "不存在维修单号" };
return new ApiResult { code = 1, msg = "查询成功", data = dataSet };
}
#endregion
#region[模具维修验收单编辑时获取表体数据]
[Route("Sc_MouldRepairCheckBill/Sb_MouldRepairCheckBillListProjectDetai")]
[HttpGet]
public object Sb_MouldRepairCheckBillListProjectDetai(string sqlWhere)
{
DataSet ds;
try
{
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
if (sqlWhere == null || sqlWhere.Equals(""))
{
//ds = oCN.RunProcReturn("select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark from Sc_MouldRepairCheckBillSub", "Sc_MouldRepairCheckBillSub");
ds = oCN.RunProcReturn("select HRepairCheckID,验收项目代码 HRepairCheckCode,验收项目 HRepairCheckName,验收内容 HRepairCheckContent,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldRepairCheckBillList_Edit", "h_v_Sc_MouldRepairCheckBillList_Edit");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
else
{
//string sql1 = "select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark from Sc_MouldRepairCheckBillSub where 1 = 1 ";
string sql1 = "select HRepairCheckID,验收项目代码 HRepairCheckCode,验收项目 HRepairCheckName,验收内容 HRepairCheckContent,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldRepairCheckBillList_Edit where 1 = 1 ";
string sql = sql1 + sqlWhere;
ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldRepairCheckBillList_Edit");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + e.ToString();
objJsonResult.data = null;
}
return objJsonResult;
}
#endregion
#region [模具维修验收单删除功能]
///
/// 模具维修单删除功能
///
///
[Route("Sc_MouldRepairCheckBill/DeltetMouldRepairCheckBill")]
[HttpGet]
public object DeltetMouldRepairCheckBill(string HInterID)
{
//编辑权限
//if (!DBUtility.ClsPub.Security_Log("Sc_MouldRepairCheckBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
//{
// objJsonResult.code = "0";
// objJsonResult.count = 0;
// objJsonResult.Message = "无删除权限！";
// objJsonResult.data = null;
// return objJsonResult;
//}
Int64 lngBillKey = 0;
lngBillKey = DBUtility.ClsPub.isLong(HInterID);
if (lngBillKey == 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据ID为空！";
objJsonResult.data = null;
return objJsonResult;
}
DAL.ClsSc_MouldRepairCheckBill oBill = new DAL.ClsSc_MouldRepairCheckBill();
if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
{
if (oBill.omodel.HBillStatus > 1)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据当前处于不能删除状态,不能删除！";
objJsonResult.data = null;
return objJsonResult;
}
if (oBill.omodel.HChecker != "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据已经审核,不能删除！";
objJsonResult.data = null;
return objJsonResult;
}
bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
if (IsDete)
{
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据未找到";
objJsonResult.data = null;
return objJsonResult;
}
}
#endregion
#region 模具故障登记表
#region 模具故障登记表保存/编辑
///
/// 保存模具维修单
///
///
///
[Route("Sc_MouldConkBookBill/SaveGetMouldConkBookBillList")]
[HttpPost]
public object SaveGetMouldConkBookBillList([FromBody] JObject msg)
{
var _value = msg["msg"].ToString();
string msg1 = _value.ToString();
string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
string msg2 = sArray[0].ToString();
string msg3 = sArray[1].ToString();
string UserName = "";
ListModels oListModels = new ListModels();
try
{
DAL.ClsSc_MouldConkBookBill oBill = new DAL.ClsSc_MouldConkBookBill();
List lsmain = new List();
msg2 = msg2.Replace("\\", "");
msg2 = msg2.Replace("\n", ""); //\n
lsmain = oListModels.getObjectByJson_Gy_MouldConkBookBillMain(msg2);
foreach (Model.ClsSc_MouldConkBookBillMain oItem in lsmain)
{
//oItem.HMaker = "";
UserName = oItem.HMaker; //制单人
DBUtility.ClsPub.CurUserName = UserName;
oItem.HBillType = "3815";
oItem.HBillSubType = "3815";
//oItem.HBillNo = ""; //单据号
//oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
//oItem.HInnerBillNo = ""; // --内部单据号
oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
oItem.HMakeDate = DBUtility.ClsPub.isStrNull(DateTime.Now.ToString("yyyy-MM-dd"));
//oItem.HEquipID = 0; //设备ID(Gy_EquipMent)
//oItem.HPeriod = 0;
//oItem.HCheckBeginDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd")); // --维修日期
//oItem.HCheckResult = ""; //验收结论--(正常，异常)
//oItem.HEmpID = 0; //验收人(Gy_Employee)
//oItem.HManagerID = 0; //负责人(Gy_Employee)
//oItem.HDeptID = 0; //验收部门(Gy_Department)
//oItem.HExplanation = ""; //摘要(故障描述)
//oItem.HRemark = ""; //备注
//oItem.HMainSourceInterID = oItem.HInterID;
//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
objJsonResult.data = 1;
return objJsonResult;
}
oBill.omodel = oItem;
}
//表体数据
//按 },{来拆分数组 //去掉【和】
msg3 = msg3.Substring(1, msg3.Length - 2);
msg3 = msg3.Replace("\\", "");
msg3 = msg3.Replace("\n", ""); //\n
//msg2 = msg2.Replace("'", "’");
List ls = new List();
ls = oListModels.getObjectByJson_Gy_MouldConkBookBillSub(msg3);
int i = 0;
foreach (Model.ClsSc_MouldConkBookBillSub oItemSub in ls)
{
i++;
oItemSub.HEntryID = i;
//oItemSub.HRepairCheckID = 0; //验收项目ID
//oItemSub.HRepairCheckContent = ""; //验收内容
//oItemSub.HManagerID = 0; //负责人ID
//oItemSub.HCloseMan = ""; //行关闭
oItemSub.HCloseType = false; //关闭类型
//oItemSub.HRemark = ""; //备注
oItemSub.HSourceInterID = 0; // 源单主内码
oItemSub.HSourceEntryID = 0; //源单子内码
//oItemSub.HSourceBillNo = ""; //源单单号
//oItemSub.HSourceBillType = ""; //源单类型
//oItemSub.HRelationQty = 0; //关联数量
//oItemSub.HRelationMoney = 0; //关联金额
//oItemSub.HRepairID = 0; //维修项目
//oItemSub.HRepairExplanation =""; //维修要求
//oItemSub.HMoney = 0; //维修费用
oBill.DetailColl.Add(oItemSub);
}
//保存
//保存完毕后处理
bool bResult;
if (oBill.omodel.HInterID == 0)
{
// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
}
else
{
bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
}
if (bResult)
{
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "保存成功！";
//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
objJsonResult.data = 1;
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = 1;
return objJsonResult;
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + e.ToString();
objJsonResult.data = 1;
return objJsonResult;
}
}
#endregion
#region[模具故障登记表编辑时获取表头数据]
[Route("Sc_MouldConkBookBill/Sb_MouldConkBookBillListCheckDetai")]
[HttpGet]
public ApiResult Sb_MouldConkBookBillListCheckDetai(string HID)
{
if (string.IsNullOrEmpty(HID))
return new ApiResult { code = -1, msg = "ID不能为空" };
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldConkBookBillList_Edit where hmainid= " + HID + " ", "h_v_Sc_MouldConkBookBillList_Edit");
if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
return new ApiResult { code = -1, msg = "不存在维修单号" };
return new ApiResult { code = 1, msg = "查询成功", data = dataSet };
}
#endregion
#region[模具故障登记表编辑时获取表体数据]
[Route("Sc_MouldConkBookBill/Sb_MouldConkBookBillListProjectDetai")]
[HttpGet]
public object Sb_MouldConkBookBillListProjectDetai(string sqlWhere)
{
DataSet ds;
try
{
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
if (sqlWhere == null || sqlWhere.Equals(""))
{
//ds = oCN.RunProcReturn("select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark from Sc_MouldRepairCheckBillSub", "Sc_MouldRepairCheckBillSub");
ds = oCN.RunProcReturn("select HConkReasonID,故障原因代码 HConkReasonCode,故障原因 HConkReasonName,故障原因描述 HConkExplanation,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldConkBookBillList_Edit", "h_v_Sc_MouldConkBookBillList_Edit");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
else
{
//string sql1 = "select HRepairCheckID,HRepairCheckContent,HManagerID,HRemark from Sc_MouldRepairCheckBillSub where 1 = 1 ";
string sql1 = "select HConkReasonID,故障原因代码 HConkReasonCode,故障原因 HConkReasonName,故障原因描述 HConkExplanation,HManagerSonID HManagerID,子负责人代码 HManagerCode,子负责人 HManagerName,备注 HRemark from h_v_Sc_MouldConkBookBillList_Edit where 1 = 1 ";
string sql = sql1 + sqlWhere;
ds = oCN.RunProcReturn(sql, "h_v_Sc_MouldConkBookBillList_Edit");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + e.ToString();
objJsonResult.data = null;
}
return objJsonResult;
}
#endregion
#region [模具故障登记表删除功能]
///
/// 模具维修单删除功能
///
///
[Route("Sc_MouldConkBookBill/DeltetMouldConkBookBill")]
[HttpGet]
public object DeltetMouldConkBookBill(string HInterID)
{
//编辑权限
//if (!DBUtility.ClsPub.Security_Log("Sc_MouldConkBookBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
//{
// objJsonResult.code = "0";
// objJsonResult.count = 0;
// objJsonResult.Message = "无删除权限！";
// objJsonResult.data = null;
// return objJsonResult;
//}
Int64 lngBillKey = 0;
lngBillKey = DBUtility.ClsPub.isLong(HInterID);
if (lngBillKey == 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据ID为空！";
objJsonResult.data = null;
return objJsonResult;
}
DAL.ClsSc_MouldConkBookBill oBill = new DAL.ClsSc_MouldConkBookBill();
if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
{
if (oBill.omodel.HBillStatus > 1)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据当前处于不能删除状态,不能删除！";
objJsonResult.data = null;
return objJsonResult;
}
if (oBill.omodel.HChecker != "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据已经审核,不能删除！";
objJsonResult.data = null;
return objJsonResult;
}
bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
if (IsDete)
{
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据未找到";
objJsonResult.data = null;
return objJsonResult;
}
}
#endregion
#endregion
#region 模具保养计划单
#region 模具保养计划单 保存/编辑
///
/// 保存模具保养计划单
///
///
///
[Route("Sc_MouldMaintainPlanBill/SaveGetMouldMaintainPlanBillList")]
[HttpPost]
public object SaveGetMouldMaintainPlanBillList([FromBody] JObject msg)
{
var _value = msg["msg"].ToString();
string msg1 = _value.ToString();
string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
string msg2 = sArray[0].ToString();
string msg3 = sArray[1].ToString();
string UserName = "";
ListModels oListModels = new ListModels();
try
{
DAL.ClsSc_MouldMaintainPlanBill oBill = new DAL.ClsSc_MouldMaintainPlanBill();
List lsmain = new List();
msg2 = msg2.Replace("\\", "");
msg2 = msg2.Replace("\n", ""); //\n
lsmain = oListModels.getObjectByJson_Gy_MouldMaintainPlanBillMain(msg2);
foreach (Model.ClsSc_MouldMaintainPlanBillMain oItem in lsmain)
{
//oItem.HMaker = "";
UserName = oItem.HMaker; //制单人
oItem.HBillType = "3818";
oItem.HBillSubType = "3818";
//oItem.HInterID =0;
//oItem.HBillNo = "";
oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
//oItem.HMakeDate = "";
//oItem.HYear = "";
//oItem.HPeriod = "";
//oItem.HRemark = "";
//oItem.HCycleUnit = "";
//oItem.HCheckCycle = "";
//oItem.HBeginDate = "";
//oItem.HEndDate = "";
//oItem.HInnerBillNo = "";
//oItem.HExplanation = "";
//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
objJsonResult.data = 1;
return objJsonResult;
}
oBill.omodel = oItem;
}
//表体数据
//按 },{来拆分数组 //去掉【和】
msg3 = msg3.Substring(1, msg3.Length - 2);
msg3 = msg3.Replace("\\", "");
msg3 = msg3.Replace("\n", ""); //\n
//msg2 = msg2.Replace("'", "’");
List ls = new List();
ls = oListModels.getObjectByJson_Gy_MouldMaintainPlanBillSub(msg3);
int i = 0;
foreach (Model.ClsSc_MouldMaintainPlanBillSub oItemSub in ls)
{
i++;
oItemSub.HEntryID = i;
//oItemSub.HCloseMan = ""; //行关闭
oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
oItemSub.HCloseType = false; //关闭类型
//oItemSub.HRemark = ""; //备注
oItemSub.HSourceInterID = 0; // 源单主内码
oItemSub.HSourceEntryID = 0; //源单子内码
//oItemSub.HSourceBillNo = ""; //源单单号
//oItemSub.HSourceBillType = ""; //源单类型
oItemSub.HRelationQty = 0; //关联数量
//oItemSub.HRelationMoney = 0; //关联金额
//HMaterID = "";//配件代码
//HUnitID = "";//单位代码
//HQty = "";//实际用量
//HQtyMust = "";//单位用量
//HRemark = "";//备注
//oItemSub.HRepairID = 0; //维修项目
//oItemSub.HRepairExplanation =""; //维修要求
//oItemSub.HManagerID = 0; //负责人ID
//oItemSub.HMoney = 0; //维修费用
oBill.DetailColl.Add(oItemSub);
}
//保存
//保存完毕后处理
bool bResult;
if (oBill.omodel.HInterID == 0)
{
// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
}
else
{
bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
}
if (bResult)
{
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "保存成功！";
//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
objJsonResult.data = 1;
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = 1;
return objJsonResult;
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + e.ToString();
objJsonResult.data = 1;
return objJsonResult;
}
}
#endregion
#region[模具保养计划单编辑时获取表头数据]
[Route("Sc_MouldMaintainPlanBill/Sc_MouldMaintainPlanBillListCheckDetai")]
[HttpGet]
public ApiResult Sc_MouldMaintainPlanBillListCheckDetai(string HID)
{
if (string.IsNullOrEmpty(HID))
return new ApiResult { code = -1, msg = "ID不能为空" };
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldMaintainPlanBillList where hmainid= " + HID + " ", "h_v_Sc_MouldMaintainPlanBillList");
if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
return new ApiResult { code = -1, msg = "不存在保养计划单" };
return new ApiResult { code = 1, msg = "查询成功", data = dataSet };
}
#endregion
#region[模具保养计划单编辑时获取表题数据]
[Route("Sc_MouldMaintainPlanBill/Sc_MouldMaintainPlanBillListProjectDetai")]
[HttpGet]
public object Sc_MouldMaintainPlanBillListProjectDetai(string sqlWhere)
{
DataSet ds;
try
{
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
if (sqlWhere == null || sqlWhere.Equals(""))
{
ds = oCN.RunProcReturn("select HMaterID,HUnitID,HQty,HQtyMust,HRemark from Sc_MouldMaintainPlanBillSub", "Sc_MouldMaintainPlanBillSub");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
else
{
string sql1 = "select HMaterID,HUnitID,HQty,HQtyMust,HRemark from Sc_MouldMaintainPlanBillSub where 1 = 1 ";
string sql = sql1 + sqlWhere;
ds = oCN.RunProcReturn(sql, "Sc_MouldMaintainPlanBillSub");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + e.ToString();
objJsonResult.data = null;
}
return objJsonResult;
}
#endregion
#region [模具保养计划单删除功能]
///
/// 模具维修单删除功能
///
///
[Route("Sc_MouldMaintainPlanBill/DeltetMouldMaintainPlanBill")]
[HttpGet]
public object DeltetMouldMaintainPlanBill(string HInterID)
{
//编辑权限
//if (!DBUtility.ClsPub.Security_Log("Sb_MouldRepairWorkBill_Delete", 1, true, DBUtility.ClsPub.CurUserName))
//{
// objJsonResult.code = "0";
// objJsonResult.count = 0;
// objJsonResult.Message = "无删除权限！";
// objJsonResult.data = null;
// return objJsonResult;
//}
Int64 lngBillKey = 0;
lngBillKey = DBUtility.ClsPub.isLong(HInterID);
if (lngBillKey == 0)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据ID为空！";
objJsonResult.data = null;
return objJsonResult;
}
DAL.ClsSc_MouldMaintainPlanBill oBill = new DAL.ClsSc_MouldMaintainPlanBill();
if (oBill.ShowBill(lngBillKey, ref DBUtility.ClsPub.sExeReturnInfo))
{
if (oBill.omodel.HBillStatus > 1)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据当前处于不能删除状态,不能删除！";
objJsonResult.data = null;
return objJsonResult;
}
if (oBill.omodel.HChecker != "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据已经审核,不能删除！";
objJsonResult.data = null;
return objJsonResult;
}
bool IsDete = oBill.DeleteBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
if (IsDete)
{
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = null;
return objJsonResult;
}
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "单据未找到";
objJsonResult.data = null;
return objJsonResult;
}
}
#endregion
#endregion
#region 模具保养记录表
#region 模具保养记录表 保存/编辑
///
/// 保存模具维修单
///
///
///
[Route("Sc_MouldMaintainBill/SaveGetMouldMaintainBillList")]
[HttpPost]
public object SaveGetMouldMaintainBillList([FromBody] JObject msg)
{
var _value = msg["msg"].ToString();
string msg1 = _value.ToString();
string[] sArray = msg1.Split(new string[] { ";" }, StringSplitOptions.RemoveEmptyEntries);
string msg2 = sArray[0].ToString();
string msg3 = sArray[1].ToString();
string msg4 = sArray[2].ToString();
string UserName = "";
ListModels oListModels = new ListModels();
try
{
DAL.ClsSc_MouldMaintainBill oBill = new DAL.ClsSc_MouldMaintainBill();
List lsmain = new List();
msg2 = msg2.Replace("\\", "");
msg2 = msg2.Replace("\n", ""); //\n
lsmain = oListModels.getObjectByJson_Sc_MouldMaintainBillMain(msg2);
foreach (Model.ClsSc_MouldMaintainBillMain oItem in lsmain)
{
UserName = oItem.HMaker; //制单人
DBUtility.ClsPub.CurUserName = UserName;
oItem.HBillType = "3819";
oItem.HBillSubType = "3819";
//oItem.HInterID =0;
//oItem.HBillNo = "";
oItem.HDate = DBUtility.ClsPub.isDate(DateTime.Now.ToString("yyyy-MM-dd"));// --日期
oItem.HYear = DBUtility.ClsPub.isLong(DateTime.Now.Year);
//oItem.HMakeDate = "";
//oItem.HYear = "";
//oItem.HPeriod = "";
//oItem.HRemark = "";
//oItem.HCycleUnit = "";
//oItem.HCheckCycle = "";
//oItem.HBeginDate = "";
//oItem.HEndDate = "";
//oItem.HInnerBillNo = "";
//oItem.HExplanation = "";
//oItem.HInterID = DBUtility.ClsPub.CreateBillID_SRMProd("1103", ref DBUtility.ClsPub.sExeReturnInfo);
if (DBUtility.ClsPub.isStrNull(oItem.HDate) == "")
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！没有单据日期，无法保存！";
objJsonResult.data = 1;
return objJsonResult;
}
oBill.omodel = oItem;
}
//保养项表体数据
//按 },{来拆分数组 //去掉【和】
msg3 = msg3.Substring(1, msg3.Length - 2);
msg3 = msg3.Replace("\\", "");
msg3 = msg3.Replace("\n", ""); //\n
//msg2 = msg2.Replace("'", "’");
List ls = new List();
ls = oListModels.getObjectByJson_Sc_MouldMaintainRuleBillSub_Item(msg3);
int i = 0;
foreach (Model.ClsSc_MouldMaintainRuleBillSub_Item oItemSub in ls)
{
i++;
oItemSub.HEntryID = i;
//oItemSub.HCloseMan = ""; //行关闭
oItemSub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
oItemSub.HCloseType = false; //关闭类型
//oItemSub.HRemark = ""; //备注
oItemSub.HSourceInterID = 0; // 源单主内码
oItemSub.HSourceEntryID = 0; //源单子内码
//oItemSub.HSourceBillNo = ""; //源单单号
//oItemSub.HSourceBillType = ""; //源单类型
oItemSub.HRelationQty = 0; //关联数量
oBill.DetailCol.Add(oItemSub);
}
//配件项表体数据
//按 },{来拆分数组 //去掉【和】
msg4 = msg4.Substring(1, msg4.Length - 2);
msg4 = msg4.Replace("\\", "");
msg4 = msg4.Replace("\n", ""); //\n
//msg2 = msg2.Replace("'", "’");
List ls1 = new List();
ls1 = oListModels.getObjectByJson_Sc_MouldMaintainBillSub(msg4);
int j = 0;
foreach (Model.ClsSc_MouldMaintainBillSub Sub in ls1)
{
j++;
Sub.HEntryID = j;
//oItemSub.HCloseMan = ""; //行关闭
Sub.HEntryCloseDate = DBUtility.ClsPub.isDate(DateTime.Now);
Sub.HCloseType = false; //关闭类型
//oItemSub.HRemark = ""; //备注
Sub.HSourceInterID = 0; // 源单主内码
Sub.HSourceEntryID = 0; //源单子内码
//oItemSub.HSourceBillNo = ""; //源单单号
//oItemSub.HSourceBillType = ""; //源单类型
Sub.HRelationQty = 0; //关联数量
//oItemSub.HRelationMoney = 0; //关联金额
//HMaterID = "";//配件代码
//HUnitID = "";//单位代码
//HQty = "";//实际用量
//HQtyMust = "";//单位用量
//HRemark = "";//备注
oBill.DetailColl.Add(Sub);
}
//保存
//保存完毕后处理
bool bResult;
if (oBill.omodel.HInterID == 0)
{
// bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
bResult = oBill.AddBill(ref DBUtility.ClsPub.sExeReturnInfo);
}
else
{
bResult = oBill.ModifyBill(oBill.omodel.HInterID, ref DBUtility.ClsPub.sExeReturnInfo);
}
if (bResult)
{
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "保存成功！";
//WebAPIController.Add_Log("送货单下推", UserName, "生成送货单");
objJsonResult.data = 1;
return objJsonResult;
}
else
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + DBUtility.ClsPub.sExeReturnInfo;
objJsonResult.data = 1;
return objJsonResult;
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "保存失败！" + e.ToString();
objJsonResult.data = 1;
return objJsonResult;
}
}
#endregion
#region[模具保养记录表编辑时获取表头数据]
[Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListCheckDetai")]
[HttpGet]
public ApiResult Sc_MouldMaintainBillListCheckDetai(string HID)
{
if (string.IsNullOrEmpty(HID))
return new ApiResult { code = -1, msg = "ID不能为空" };
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
var dataSet = oCN.RunProcReturn("select top 1 * from h_v_Sc_MouldMaintain where hmainid= " + HID + " ", "h_v_Sc_MouldMaintain");
if (dataSet == null || dataSet.Tables[0].Rows.Count == 0)
return new ApiResult { code = -1, msg = "不存在保养记录表" };
return new ApiResult { code = 1, msg = "查询成功", data = dataSet };
}
#endregion
#region[模具保养记录表编辑时获取表题数据]
[Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListProjectDetai")]
[HttpGet]
public object Sc_MouldMaintainBillListProjectDetai(string sqlWhere)
{
DataSet ds;
try
{
SQLHelper.ClsCN oCN = new SQLHelper.ClsCN();
if (sqlWhere == null || sqlWhere.Equals(""))
{
ds = oCN.RunProcReturn("select HMaterID,HUnitID,HQty,HQtyMust,HRemark,HManagerID from Sc_MouldMaintainBillSub", "Sc_MouldMaintainBillSub");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
else
{
string sql1 = "select HMaterID,HUnitID,HQty,HQtyMust,HRemark,HManagerID from Sc_MouldMaintainBillSub where 1 = 1 ";
string sql = sql1 + sqlWhere;
ds = oCN.RunProcReturn(sql, "Sc_MouldMaintainBillSub");
objJsonResult.code = "0";
objJsonResult.count = 1;
objJsonResult.Message = "获取信息成功！";
objJsonResult.data = ds.Tables[0];
}
}
catch (Exception e)
{
objJsonResult.code = "0";
objJsonResult.count = 0;
objJsonResult.Message = "没有返回任何记录！" + e.ToString();
objJsonResult.data = null;
}
return objJsonResult;
}
#endregion
#region[模具保养记录表编辑时获取表体数据新(保养项列表、配件项列表)]
[Route("Sc_MouldMaintainBill/Sc_MouldMaintainBillListProjectDetaiNew")]
[HttpGet]
public object Sc_MouldMaintainBillListProjectDetaiNew(string HInterID)
{
DataSet ds,ds1;
List